Saroukh el-Jamahiriya (Libyan Rocket) 2009

Here is the 2009 version of Muammar Gaddafis "Saroukh el-Jamahiriya (Libyan Rocket)" a car which made its debut in 1999, exactly 10 years ago.

The “Libyan Rocket”, as the prototype is called, is described as an “elegant sedan” 17 feet long, more than six feet wide, with a 3-liter, V-6 gasoline engine.

According to the BBC and Fox News, it also has airbags, an unspecified ‘electronic defense system’, and a collapsible bumper.

The car can go hundreds of miles on a flat tire, a feature that could come in handy while driving in the vast Libyan desert. Other safety features include a device to cut off the fuel supply to avoid a fire in case of accident.

Domenico Morali, CEO of Tesco TS SpA, an automotive design company based in Turin, Italy, said Qaddafi joined in discussions about the car’s styling and asked for an original car using Libyan materials including marble, leather and fabric.

The car was unveiled in Tripoli at the end of an African Union summit.

According to the BBC, construction of a factory to produce the car was to have began in October 2009 in Tripoli. (ANI)

The Revo (off road champion)

The South African built Revo is a perfect example of true innovation at it's finest.
It was built by, Achim Bergmann of Thompson Racing, for the Motorite Racing team.

The car is of a space frame construction with a fiberglass body. Tubing is 4130 cro-moly and uses a LS2 6l V8 engine coupled to a Sadev SC90 six speed sequential.

Shocks are American Radflo with secondary pistons in the coil-overs and an external bypass shock per corner. Wheel travel 300mm all round. A Works Bell Paddle Shifter NEO Universal is used to trigger up and down shifts controlled by a Motec M800.

A custom made dust seal was used to seal the paddle shifter from the extreme dust and moisture conditions encountered in off road racing. Up shift cuts ignition and pneumatically selects gear, down shift activates a pneumatic clutch, blips throttle and selects gear.. works very well.

This is Africa's first serious attempt at four-wheel drive Class A Special Vehicle. Power comes from an American built 500hp 6-litre engine and is delivered to all four BF Goodrich tyres via a 6-speed gearbox. Despite a serious air restrictor fitted to keep it in line with the other Class A entries it pulls strongly.

With so much torque on hand, ratios can be kept short but top speed is slightly limited when compared to some of the past competitors. A top speed of just over 180km/h is calculated, which might appear slow but trust me when you doing that off road and approaching a metre deep rut it is insanely fast.

Nigerian Armoured Vehicle

Nigerian Armoured Vehicle

A Nigerian made armoured car was on Thursday launched by President in this month of August 2009 at the eagle square in Abuja.

It is the first home made armoured car, with most of the materials used in its production sourced locally, while others were imported.

It was built by two Nigerian brothers who recently relocated from the United States of America. The brothers; Victor and Johnson Obasa, came back home to use their talent to boost security and also create employment in the country.

The brothers are based in Ekiti State and the duo own a company named Mobile Truck Technology where they nurtured and built the first Nigerian armoured car.

According to Johnson Obasa, the local production of the armoured car would help in upgrading the nation's security status. "It will promote up to 50 percent security in the country, it is something to protect the armoured personnel in their line of duty and it can work anywhere. It is designed to help the nation's security; we also did it to create employment," he said.

Also, Victor Obasa in a conversation with the press stated that they were in a better position to create this kind of cars since they are in Nigeria and understand the Nigerian terrain.

He added that they were willing to do it for the government at almost half the price of importing it. "We would do it for Nigerians for almost half the price they get it outside," he said.

The truck which was tested with different kinds of ammunition, from a far range had little or no mark left on it, but from a close range left peripheral marks.

On how they created such a truck with products from Nigeria, Johnson said: "It's been a little bit of up and down's. When we encountered some challenges, the Senate president encouraged us and at the end of the day we were able to put this together."

The other brother Victor pledged that they would produce a vehicle carrier that would meet international standard at a reasonable price.

The Minister of Federal Capital Territory, Adamu Aliero who represented the president at the launch said it was commendable that Nigerians with talents will come home and contribute to the nation's development.

He disclosed that the President had directed the Inspector General of Police to meet the fabricators on what they required to produce the vehicle to specification.

He also called on Nigerians within and outside the country with such talents to come out and contribute to the development of their country.

"This is also to call on other Nigerians with similar talents to also come back home and join us to contribute their own quota to the country and for other Nigerians with this kind of talent to put it to use," Mr. Aliero said.

Present at the event to inspect the vehicle were top police officers and the Minister for science amd Technology, Al-Hassan Zaku who said the ministry would send a team of engineers to the base where the truck was fabricated to further examine the product.

"We will examine it thoroughly and work with the police to ensure that it is properly produced to the standard they want," he said.

courtesy of Elizabeth Archibong

Cairo car.

Here is the work of the Technical and Vocational Institute at the Arab Academy (for Science and Technology and Maritime Transport) in Alexandria Egypt.

This is Egypt's first electric car project, entitled the Cairo car.

Serious research to develop and create localized technology towards producing a fine example of Egyptian ingenuity. This research is based on reverse engineering as well as self innovation to help achieve a national goal of a purely made in Egypt quality product. Its a 4 seater, and the platform has being successfully been tested. No details on the possibility of the Cairo car reaching production.

The MENARA

The MENARA is MOROCCO'S answer to the executive sports car. Entirely made and built in Morocco to very high standards.

The MENARA is a harmonious mix of technology and classic automotive design.

2009 Barnard Racer Prototype

2009 Barnard Racer Prototype
(South Africa)


It's been over 50 years since South Africa has produced a home-bred supercar. This is excluding the Shelby Cobras and Noble cars assembled in that country but basically originating from elsewhere. A chap by the name of Chris Barnard wants to change all that by introducing a car he simply calls the Barnard.

The Barnard is powered by a twin-turbo Porsche V8 engine with a power rating of 617bhp (460kW). It should deliver a sub-4 second 0 - 60mph time and a theoretical top speed of over 240mph (386km/h). Only the driver really holds those horses back because the Barnard is missing some equipment namely power steering, ABS brakes and traction control. Even the windows require manual manpower to operate. It's a contrast to the cockpit which is inspired by one of Barnard's other interests, aviation.

Built on a monocoque chassis that's made from lightweight hi-tech steels like Domex and Docol, the car is more race road car than anything else. It's designed to accommodate buyers' interests and can be personalised to a great extent, depending on budgets offered. The engine itself can be uprated to suit the buyer's desires.

"This is a car which has been built with the objective of breaking barriers, and no expense has been spared to make it into what I believe is the most single-minded performance machine yet from South Africa," Barnard said.

To help keep it on the road are things like a rear diffuser, a flat undertray and cutouts on the front wheel arches that generate larges doses of downforce.

Customer deliveries of the Barnard will begin in the middle of the year at a cost of about R1.1 million (about US$110,000) a pop.

The Zagato Perana- Z-one

The Zagato Perana- Z-one
(South Africa)

The Perana Z-One is a South African supercar styled by the famous Italian design firm Zagato.

The Perana name is well known amongst performance car fans in South Africa as the name was given to a range of Ford vehicles tuned by Basil Green Motors in Johannesburg back in the 70s and 80s.

However unlike the old Perana vehicles the Z-One is powered by a GM sourced engine, a 6.2 litre LS3 V8 to be exact. Mounted up front this engine should give the coupe fantastic performance while also being easily serviced and long lasting.

Each curvaceous body of the Perana Z-One will be individually created by Zagato before being sent to South Africa where it will be joined to the chassis and drivetrain.

The body itself manages to be both classically proportioned and contemporarily styled. It also incorporates a number of Zagato trademark styling details like the double bubble roof and hidden 'Z' built into the b-pillar.

In total only 999 examples of the Perana Z-One are due to be built.

The Perana Z-one will be produced at the world renowned Hi Tech Automotive Manufacturing Facility. Located on the outskirts of the Friendly City of Port Elizabeth, this manufacturing facility is considered to be one of the world's foremost low volume specialist sports car manufacturers.

The allure of the Perana Z-one is complimented by its hand-built manufacturing processes leading to unrivaled craftsmanship and finish. This leads to cars with a build integrity that allows them to be accepted as classics in their own right.

From the computerized drawing office to the paint shop, where the entire paint shop is pressurized and not only the spray booths, our attention to detail allows for unrivaled quality and finishes.

All this can only happen through experienced management, employing craftsman and adherence to rigorous quality controls to meet the discerning demands of an unforgiving international market.